Model

DS-2CD6026FHWD-A

Image Sensor

1/1.8 inch Progressive Scan CMOS

Signal System

PAL/ NTSC

Min. Illumination

Color: 0.001 Lux @ (F1.2, AGC ON); B/W: 0.0001 Lux @ (F1.2, AGC ON)

Shutter time

1/1 s to 1/100,000 s

Slow shutter

Support

Lens Mount

C/CS mount

Auto Iris

DC drive

Day & Night

IR cut filter with auto switch

Wide Dynamic Range

120dB

Focus

Auto Back Focus (-A model)

Video Compression

H.264/ MPEG4/ MJPEG

H.264 code profile

Baseline Profile/ Main Profile/ High Profile

Video bit rate

32Kbps~16Mbps

Audio Compression

G.711/G.722.1/G.726/MP2L2

Audio bit rate

64Kbps (G.711)/ 16Kbps (G.722.1)/ 16Kbps (G.726)/ 32-128Kbps (MP2L2)

Triple Streams

Yes

Max. Image Resolution

1920 x 1080

Frame Rate

50Hz: 50fps (1920 x 1080), 50fps (1280 x 960), 50fps (1280 x 720)

60Hz: 60fps (1920 x 1080), 60fps (1280 x 960), 60fps (1280 x 720)

Third Stream

Independent with Main Stream and Sub Stream, up to

50Hz: 25fps (1920 x 1080); 60Hz: 30fps (1920 x 1080)

Image Enhancement

BLC/3D DNR/ROI/Defog/EIS

Image Settings

Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser

Regional Cropping

Support

Picture Overlay

LOGO picture can be overlaid on video with 128x128 24bit bmp format

Day/Night Switch

Auto/ Schedule/ Triggered by Alarm In

Network

Network Storage

Micro SD/SDHC/SDXC card with ANR (up to 128G), NAS (Support NFS, SMB/CIFS)

Alarm Trigger

Line crossing detection, Intrusion detection, Defocus detection, Scene change detection, Motion detection, Face detection, Dynamic analysis, Tampering alarm, Network disconnect, IP address conflict, Storage exception

Protocols

TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour

Security

User Authentication, Watermark, IP address filtering, anonymous access, flickerless, heartbeat, video mask

System Compatibility

ONVIF (Profile S, Profile G), PSIA, CGI, ISAPI

Audio Input

1-ch 3.5 mm audio interface, Mic in/Line in. 1 built-in Microphone

Audio Output

1-ch 3.5mm audio interface (line level, 600 Ω)

Communication Interface

1 RJ45 10M/100M Ethernet port, 1 RS-485 interface and 1 RS-232 interface

Alarm

1 input, 1 output (up to 24VDC 1A or 110VAC 500mA)

Video Output

1Vp-p Composite Output (75 Ω, BNC)

On-board storage

Built-in Micro SD/SDHC/SDXC slot, up to 128 GB

Reset Button

Yes

Audio

Environment Noise Filtering

Support

Audio I/O

Support dual audio track, stereo

Audio Sampling Rate

16kHz / 32kHz / 44.1kHz / 48kHz

Behavior Analysis

Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal

Line Crossing Detection

Cross a pre-defined virtual line

Intrusion Detection

Enter and loiter in a pre-defined virtual region

Region Entrance

Enter a pre-defined virtual region from the outside place

Region Exiting

Exit from a pre-defined virtual region

Unattended Baggage

Objects left over in the pre-defined region such as the baggage, purse, dangerous materials

Object Removal

Objects removed from the pre-defined region, such as the exhibits on display

Exception Detections

Scene change detection, Sudden audio increase/ decrease detection, Audio loss detection, Defocus detection

Recognition

Face detection recognition

Statistics

Object Counting (Entrance and Exit object number is accounted and showed on screen in real time)

Power Supply

24VAC± 10%, 12VDC ± 10%, PoE (802.3af)

Power Consumption

Max. 6 W (Max. 9W with IR cut filter on)

Dimensions

69.8 x 58 x 145 mm

Weight

830g